Print this page
Thursday, 15 May 2014 17:29

MICRO TOUCH Biochemistry Analyser 1300

Rate this item
(3 votes)

Gentaur Micro touch

DESCRIPTION: 

MICRO TOUCH is a programmable Biochemistry Analyzer with a user-friendly touch screen.  It measures the optical densities of samples and it uses algorithm to calculate results, which are used for biochemical investigation.  It is a photometer operating in the visible range. The instrument is an open photometer suitable for absorbance (optical density) measures as well as sample concentration determination. It has a user-friendly program and capacity of storing the programmed analytical methods and the QC results. It is intended for in vitro diagnostic use.

FEATURES:

•—   Effective temperature regulation system with Peltier controlled cuvette / flow cell block.

•  Dual reading mode                                              

•—   Robust system with built in stabilizer.

•—   Latest technology with battery back up for 250 tests with QC, more than 2000 results.

•—   Robust in built 20 Column Thermal Printer with 384 stationary heads.

•—   Unique circuitry for long lamp life.

•—   Reliable peristaltic pump with maintenance free operations.

•—   Sophisticated software for kinetic graph with built in delta calculation for saturated (high) samples from graphic display without diluting and rerunning the samples.

•—   Monochromatic, Bichromatic Measurement

•—   Multi Standard Calibration

•—   Patients ID entry.

•—   Editing of saved tests.

•—   Human machine user interface:        

Touchpad, Keypad:

•   Levey Jennings and standard deviation graphs.

•—   Optional interface for External Printer

•—   Patient report with PID & Name

•—   Access to Test by Touch of Key

Technical specification of MICRO TOUCH:

Human Machine Interface

TOUCH PANEL / KEYPAD

Linear measurement range

0.000 to 3.000 Absorbance Units (A).

Photometric Accuracy

± 2% or 0.007 whichever is higher, from 0 to 1.5 A
± 3% from 1.5 A to 3.0 A

Drift

<0.007 A/hr

Photometric Linearity

2.2 A

Optical measurement

Photodiode

Filters
Type of filter
Wave Length
Half Bandwidth
Filter Selection

 

Interference
340, 405, 510, 546, 578 and 630 nm & Two Optional
10nm ± 2nm
Automatic by Stepper Motor.

Flow Cell
Sipping Volume
Flow cell Volume
Sipping Mode

 

300 to 1000 µl
18µl
Automatic by specially designed Peristaltic Pump

Cuvette Volume

500 µl

Temperature of cuvette/flow cell Block
Method
Temperature

 

By Peltier effect
25, 30 and 370C

Light source

Tungsten Halogen

Warm up Time

90 Sec

Display

5” Graphic LCD, Negative Blue, STN

Printer

Built in thermal printer

Memory

64 KB – Non volatile RAM with Battery back up

Storage Capacity

250 Open tests, with 30 QC results / test
(Normal and abnormal controls) and more than
2500 Patient results with patient ID (6 digits)

Analysis Mode

Absorbance                   Kinetic
End Point                       Differential
Ratio                                Fixed Time
Coagulation

Concentration Calculation

By factor or by Standard

RS232 serial port

9600 baud, 1 start, 8 data, 1 stop, no parity bits

Power
Wattage
Voltage

 

50 watts
115 – 230 Volts ± 10 %, 60 – 50 Hz

Operating Position

On horizontal, flat, rigid and vibration free surface

Operating Conditions
Temperature
Relative Humidity

 

From + 180C to + 350C
Up to 85 %

Storage Condition
Temperature
Relative Humidity

 

From –100C to + 600C
Up to 85 %

Enclosure

ABS Fire retardant

Size (cm)

30 X 38 X 13.5 (l X b X h)

Weight

5.5 Kgs. (Approx)

 

PDF-IconDownload Technical Sheet Specification

Price: 1109

Order Button1

 

Contacts:

Gentaur / GDMS Belgium

Voortstraat 49, BE – 1910 Kampenhout

 

Tel: 003222650921

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

 

More: Analyser

1109 euro
Read 4193 times

Related items